A single thread can monitor large numbers of channels with readiness selection.
The Selectorand related classes provide the APIs todo readiness selection on channels.
Selector Basics
You register one or more previously created selectable channels with a selector object.
A key that represents the relationship between one channel and oneselector is returned.
Selection keys remember what you are interested in for eachchannel.
They also track the operations of interest that their channel is currently ready to perform.
When you invoke select() on a selector object, the associated keys are updated by checking all the channels registered with that selector.
You can obtain a set of the keys whose channels were found to be ready at that point.
By iterating over these keys, you can service each channel that has become ready since the last time you invoked select().
事件驱动模型
注册感兴趣的事件到Selector中，当某个channel上发生了注册的事件，将会得到通知。
The real power of readiness selection is that a potentially large number of channels can bechecked for readiness simultaneously.
Optionally, the invoking thread can ask to be put to sleep until one or more of the channels registered with the Selectoris ready, or it can periodically poll the selector to see if anything has become ready since the last check.
睡眠或者轮询，以便发现某个事件已处于准备完成的状态
True readiness selection must be done by the operating system.
One of the most important functions performed by an operating system is to handle I/O requests and notify processes when their data is ready.
Soit only makes sense to delegate this function down to the operating system.
The Selectorclass provides the abstraction by which Java code can request readiness selection service from the underlying operating system in a portable way.
由底层操作系统通知Java进程发生了某个事件需要处理，然后再传递到Selection中。
The Selector, SelectableChannel, and SelectionKey
Selector
The Selectorclass manages information about a set of registered channels and
their readiness states. Channels are registered with selectors, and a selector can be
asked to update the readiness states of the channels currently registered with it.
When doing so, the invoking thread can optionally indicate that it would prefer to
be suspended until one of the registered channels is ready.
SelectableChannel
This abstract class provides the common methods needed to implement channel
selectability. It's the superclass of all channel classes that support readiness
selection. FileChannelobjects are not selectable because they don't extend from
SelectableChannel. All the socket channel classes are selectable,
as well as the channels obtained from a Pipeobject. SelectableChannelobjects
can be registered with Selectorobjects, along with an indication of which
operations on that channel are of interestfor that selector. A channel can be
registered with multiple selectors, but only once per selector.
SelectionKey
A SelectionKeyencapsulates the registration relationship between a specific
channel and a specific selector. A SelectionKeyobject is returned from
SelectableChannel.register()and serves as a token representing the registration.
SelectionKeyobjects contain two bit sets (encoded as integers) indicating which
channel operations the registrant has aninterest in and which operations the
channel is ready to perform.
A channel must first be placed in nonblocking mode (by calling configureBlocking(false)) before it can be registered with a selector.
A selector maintains a set of channels to monitor.
The important thing is to remember that the Selector object controls the selection process for
the channels registered with it.
Selectors are the managing objects, not the selectable channel objects.
The Selectorobject performs readiness selection of channels registered with it and manages selection keys.
Setting Up Selectors
Selector selector = Selector.open();
channel1.register (selector, SelectionKey.OP_READ);
channel2.register (selector, SelectionKey.OP_WRITE);
channel3.register (selector, SelectionKey.OP_READ |
SelectionKey.OP_WRITE);
// Wait up to 10 seconds for a channel to become ready
readyCount = selector.select (10000);
There are four defined selectable operations: read , write , connect , and accept .
public static final int OP_READ
public static final int OP_WRITE
public static final int OP_CONNECT
public static final int OP_ACCEPT
Not all operations are supported on all selectable channels. A SocketChannel
cannot do an accept, for example.
Channels are not immediately deregistered when the associated key is cancelled. They remain
registered until the next selection operation occurs .
Using Selection Keys
A key represents the registration of a particular channel object with a particular selector object.
When it's time to terminate that relationship, call the cancel()method on the SelectionKeyobject.
A key can be checked to see if it still represents a valid registration by calling its isValid()method. When a key is cancelled, it's placed in the cancelled set of the associated selector.
The registration is not immediately terminated, but the key is immediately invalidated,any cancelled keys will be cleared from the cancelled key set, and the corresponding deregistrations will be completed.
A channel can be registered with many selectors
When a channel is closed:
all keys associated with it are automatically cancelled
When a selector is closed:
all channels registered with that selector are deregistered, and the associated keys are
invalidated (cancelled).
When a key is cancelled:
calling any of its methods related to selection will throw a CancelledKeyException.
if ((key.readyOps() & SelectionKey.OP_READ) != 0)
{
myBuffer.clear();
key.channel().read (myBuffer);
doSomethingWithBuffer (myBuffer.flip());
}
if (key.isWritable())
//is equivalent to:
if ((key.readyOps() & SelectionKey.OP_WRITE) != 0)
attach (Object ob)
This is a convenience that allows you to associate an arbitrary object with a key. This object can be a reference to anything meaningful to you, such as a business object , session handle , another channel, etc . This allows you to iterate through the keys associated with a selector, using the attached object handle on each as a reference to retrieve the associated context.
The attach()method stores the provided object reference in the key object.
If the selection key is long-lived, but the object you attach should not be, remember to clear the attachment when you're done. Otherwise, your attached object will not be garbage collected, and you may have a memory leak .
SelectionKey key = channel.register (selector, SelectionKey.OP_READ,
myObject);
//is equivalent to this
SelectionKey key = channel.register (selector, SelectionKey.OP_READ);
key.attach (myObject);
The Selection Process
Each Selectorobject maintains three sets of keys:
Registered key set
The set of currently registered keys associated with the selector. Not every
registered key is necessarily still valid. This set is returned by the keys()method
and may be empty. The registered key set is not directly modifiable;
Selected key set
A subset of the registered key set. Each member of this set is a key whose
associated channel was determined by the selector (during a prior selection
operation) to be ready for at least one of the operations in the key's interest set.
This set is returned by the selectedKeys()method (and may be empty).
Keys can be directly removed from this set, but not added.
Cancelled key set
A subset of the registered key set, this set contains keys whose cancel()methods
have been called (the key has been invalidated), but they have not been
deregistered. This set is private to the selector object and cannot be accessed
directly.
Managing Selection Keys
The way to clear the ready set of a SelectionKeyis to remove the key itself from the set
of selected keys.
The ready set of a selection key is modified only by the Selectorobject
The conventional approach is to perform a select() call on the selector (which updates the selected key set) then iterate over the set of keys returned by selectedKeys().
As each key is examined in turn, the associated channel is dealt with according to the key's ready set.
The key is then removed from the selected key set (by calling remove() on the Iterator object), and the next key is examined.
When complete, the cycle repeats by calling select()again.
This example is bad:
reading the data synchronously in the main thread.
package com.java.nio;
import java.net.InetSocketAddress;
import java.net.ServerSocket;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.ServerSocketChannel;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
import java.util.logging.Logger;
public class SelectSockets {
private final Logger logger = Logger.getLogger(getClass().getName());
private static int PORT_NUMBER = 1234;
public static void main(String[] argv) throws Exception {
new SelectSockets().go(argv);
}
private void go(String[] argv) throws Exception {
int port = PORT_NUMBER;
if(argv.length>0) {
port = Integer.parseInt(argv[0]);
}
logger.info("Listen on port " + port);
//Allocate an unbound server socket channel
ServerSocketChannel serverChannel = ServerSocketChannel.open();
//Get the associated SeverSocket to bind it with
ServerSocket serverSocket = serverChannel.socket();
//Create a new Selector for use below
Selector selector = Selector.open();
//Set the port the server channel will listen to
serverSocket.bind(new InetSocketAddress(port));
//Set nonblocking mode for the listening socket
serverChannel.configureBlocking(false);
//Register the ServerSocketChannle with the Selector
serverChannel.register(selector, SelectionKey.OP_ACCEPT);
while(true) {
//This may block for a long time. Upon returning, the selected set contains keys of the ready channels.
int n = selector.select();
if(n==0)
continue;
//Get an iterator over the set of selected key
Iterator<SelectionKey> iter = selector.selectedKeys().iterator();
//Look for each key in the selected set
while(iter.hasNext()) {
SelectionKey key = (SelectionKey)iter.next();
//Is a new connection come in ?
if(key.isAcceptable()) {
ServerSocketChannel server = (ServerSocketChannel)key.channel();
SocketChannel channel = server.accept();
registerChannel(selector, channel, SelectionKey.OP_READ);
sayHello(channel);
} else if(key.isReadable()) {
readDataFromSocket(key);
}
//Remove key from selected set; because it's been handled!
iter.remove();
}
}
}
/**
* Use the same byte buffer for all channels.
* A single thread is servicing all the channels, so no danger of concurrent acccess.
*/
private ByteBuffer buffer = ByteBuffer.allocate(1024);
/**
* Sample data handler method for a channel with data ready to read.
*/
protected void readDataFromSocket(SelectionKey key) throws Exception {
SocketChannel socketChannel = (SocketChannel)key.channel();
int count;
buffer.clear();//Empty buffer
//Loop while data is available; channel is nonblocking
while((count=socketChannel.read(buffer))>0) {
buffer.flip();//Make buffer readable
//Send the data;don't assume it goes all at once
while(buffer.hasRemaining()) {
socketChannel.write(buffer);//change it!
}
buffer.clear();//Empty buffer
}
if(count<0)
socketChannel.close();// Close channel on EOF, invalidates the key
}
/**
* A greeting to the incoming client connection.
* @throws Exception
*/
private void sayHello(SocketChannel channel) throws Exception {
buffer.clear();
buffer.put("Hi there!\r\n".getBytes());
buffer.flip();
channel.write(buffer);
}
/**
* Register the given channel with the given selector for the given operations of interest
*/
protected void registerChannel(Selector selector, SocketChannel channel,
int ops) throws Exception {
if(channel == null)
return; //could happen
//Set the new channel nonblocking
channel.configureBlocking(false);
//Register it with the selector
channel.register(selector, ops);
}
}
This example is good:
Uses a thread pool to service channels with data to read.
Passes the SelectionKey object to a worker thread for servicing.
SelectionKeySet被多线程操作是不安全的，但是可以把key分配给不同的线程去执行。
A better approach is to use one selector for all selectable channels and delegate the
servicing of ready channels to other threads.
You have a single point to monitor channel
readiness and a decoupled pool of worker threads to handle the incoming data. The thread
pool size can be tuned (or tune itself, dynamically) according to deployment conditions.
Management of selectable channels remains simple, and simple is good.
使用一个selector对所有通道进行监测，委派“就绪”状态的通道给其它线程去执行。
1个线程负责监听channel是否处于某种就绪状态
1个线程池负责与就绪状态的通道进行交互（接受请求，读取数据，写出数据）
示例中的线程池部分需要使用Concurrent包中的线程池进行替换
服务端：
package com.java.nio;
import java.io.IOException;
import java.net.InetSocketAddress;
import java.net.ServerSocket;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.ServerSocketChannel;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.List;
import java.util.logging.Logger;
public class SelectSocketsThreadPool {
private final Logger logger = Logger.getLogger(getClass().getName());
private static final int MAX_THREADS = 5;
private static int PORT_NUMBER = 1234;
private ByteBuffer buffer = ByteBuffer.allocate(1024);
private ThreadPool pool = new ThreadPool(MAX_THREADS);
public static void main(String[] args) throws Exception {
new SelectSocketsThreadPool().go(args);
}
private void go(String[] argv) throws Exception {
int port = PORT_NUMBER;
if(argv.length>0) {
port = Integer.parseInt(argv[0]);
}
logger.info("------>>>Listen on port " + port);
//Allocate an unbound server socket channel
ServerSocketChannel serverChannel = ServerSocketChannel.open();
//Get the associated SeverSocket to bind it with
ServerSocket serverSocket = serverChannel.socket();
//Create a new Selector for use below
Selector selector = Selector.open();
//Set the port the server channel will listen to
serverSocket.bind(new InetSocketAddress(port));
//Set nonblocking mode for the listening socket
serverChannel.configureBlocking(false);
//Register the ServerSocketChannle with the Selector
serverChannel.register(selector, SelectionKey.OP_ACCEPT);
while(true) {
//This may block for a long time. Upon returning, the selected set contains keys of the ready channels.
int n = selector.select();
if(n==0)
continue;
//Get an iterator over the set of selected key
Iterator<SelectionKey> iter = selector.selectedKeys().iterator();
//Look for each key in the selected set
while(iter.hasNext()) {
SelectionKey key = (SelectionKey)iter.next();
//Is a new connection come in ?
if(key.isAcceptable()) {
ServerSocketChannel server = (ServerSocketChannel)key.channel();
SocketChannel channel = server.accept();
//注册当前被接受的channel的"可读事件"到selector中
registerChannel(selector, channel, SelectionKey.OP_READ);
sayHello(channel);//客户端连接成功后便发送1条消息给客户端
} else if(key.isReadable()) {
//当channel发生"可读事件"，开始从当前channel中读取数据(具体什么时候数据到达利用了底层操作系统的功能)
readDataFromSocket(key);
}
//Remove key from selected set; because it's been handled!
iter.remove();
}
}
}
/**
* 将channel注册到selector对象中，由selector负责监听此通道上"请求连接"事件
*/
private void registerChannel(Selector selector, SocketChannel channel,
int ops) throws Exception {
if(channel == null)
return; //could happen
//Set the new channel nonblocking
channel.configureBlocking(false);
//Register it with the selector
channel.register(selector, ops);
}
/**
* 通过线程池中的线程进行数据的读取
*/
private void readDataFromSocket(SelectionKey key) throws Exception {
Worker worker = pool.getWorker();
if(worker==null)
return;
//Invoking this wakes up the worker thread, then returns
worker.serviceChannel(key);
}
private void sayHello(SocketChannel channel) throws Exception {
buffer.clear();
buffer.put("Hi ~ welcome you!\r\n".getBytes());
buffer.flip();
channel.write(buffer);
}
/**
* 内部维护1个线程池
*/
private class ThreadPool {
//Threads are cycled through a FIFO idle queue.
List<Worker> idle = new LinkedList<>();
ThreadPool(int poolSize) {
for(int i=0; i<poolSize; i++) {
Worker thread = new Worker(this);
thread.setName("【Woker " + (i+1) + "】");
thread.start();
idle.add(thread);
}
}
/**
* Find an idle worker thread, if any. Could return null.
*/
Worker getWorker() {
Worker worker = null;
synchronized (idle) {
if(!idle.isEmpty())
worker = idle.remove(0);
}
return worker;
}
/**
* return itself to the idle pool.
*/
void returnWoker(Worker worker) {
synchronized (idle) {
idle.add(worker);
}
}
}
/**
* 线程类
*/
private class Worker extends Thread {
private ByteBuffer buffer = ByteBuffer.allocate(1024);
private ThreadPool pool;
private SelectionKey key;
Worker(ThreadPool pool) {
this.pool = pool;
}
synchronized void serviceChannel(SelectionKey key) {
this.key = key;
//This will cause the selector to ignore read-readiness for this channel while the worker thread is servicing it.
key.interestOps(key.interestOps() & (~SelectionKey.OP_READ));
this.notify();
}
@Override
public synchronized void run() {
logger.info(this.getName() + " is ready");
//Loop forever waiting for work to do
while(true) {
try {
this.wait();
} catch (InterruptedException e) {
e.printStackTrace();
System.out.println(this.isInterrupted());
//clear interrupt status
Worker.interrupted();
}
if(key==null)
return; // just in case
logger.info(this.getName()+" has been awakened");
try {
drainChannel(key);
} catch (Exception e) {
e.printStackTrace();
try {
key.channel().close();//遇到异常关闭channel
} catch (IOException e1) {
e1.printStackTrace();
}
key.selector().wakeup();
}
key = null;
// Done. Ready for more. Return to pool
this.pool.returnWoker(this);
}
}
/**
* 从channel中读取数据
*/
void drainChannel(SelectionKey key) throws Exception {
SocketChannel channel = (SocketChannel) key.channel();
int count;
buffer.clear();
// Loop while data is available; channel is nonblocking
while((count=channel.read(buffer))>0) {
buffer.flip();
while(buffer.hasRemaining())
channel.write(buffer);
buffer.clear();
}
if(count<0) {
logger.info(channel.toString() + " closed");
channel.close();// Close channel on EOF; invalidates the key
return;
}
logger.info(key.toString() + " register OP_READ again!");
key.interestOps(key.interestOps() | SelectionKey.OP_READ);
key.selector().wakeup();
}
}
}
客户端：
package com.java.nio;
import java.io.IOException;
import java.net.InetSocketAddress;
import java.nio.ByteBuffer;
import java.nio.CharBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.SocketChannel;
import java.nio.charset.Charset;
import java.nio.charset.CharsetDecoder;
import java.nio.charset.CharsetEncoder;
import java.util.Iterator;
import java.util.Random;
public class SocketChannelClient {
private CharsetEncoder encoder = Charset.forName("UTF-8").newEncoder();
private CharsetDecoder decoder = Charset.forName("UTF-8").newDecoder();
private final int SERVER_PORT = 1234;
private Selector selector = null;
private SocketChannel socket = null;
private SelectionKey clientKey = null;
public static void main(String[] args) {
new SocketChannelClient().new ClientThread().start();
}
public SocketChannelClient() {
init();
}
private void init() {
try {
//create a selector
selector = Selector.open();
//create socket and register
socket = SocketChannel.open();
socket.configureBlocking(false);
clientKey = socket.register(selector, SelectionKey.OP_CONNECT);
InetSocketAddress remote = new InetSocketAddress("localhost", SERVER_PORT);
//connect to remote server
socket.connect(remote);
} catch (IOException e) {
e.printStackTrace();
}
}
private class ClientThread extends Thread {
int times = 0;
@Override
public void run() {
try {
//listening for event
for(;;) {
selector.select();
Iterator<SelectionKey> iter = selector.selectedKeys().iterator();
while(iter.hasNext()) {
SelectionKey key = iter.next();
iter.remove();
if(key.isConnectable()) {
//connection event
SocketChannel channel = (SocketChannel)key.channel();
if(channel.isConnectionPending())
channel.finishConnect();
channel.register(selector, SelectionKey.OP_READ);
send("Hello Server!");
} else if(key.isReadable()) {
//read event
SocketChannel channel = (SocketChannel)key.channel();
//read data
ByteBuffer buffer = ByteBuffer.allocate(100);
channel.read(buffer);
buffer.flip();
String msg = decoder.decode(buffer).toString();
System.out.println("Receive :" + msg);
Thread.sleep(3000);
if(++times==10)
throw new RuntimeException("达到最大通信次数，程序终止");
send("abcdefghijklmnopqrst".substring(new Random().nextInt(10)));
}
}
}
} catch(Exception e) {
e.printStackTrace(System.err);
} finally {
close();
}
}
//send message to server
public void send(String msg) {
try {
SocketChannel client = (SocketChannel)clientKey.channel();
client.write(encoder.encode(CharBuffer.wrap(msg)));
} catch (Exception e) {
e.printStackTrace();
}
}
//shut down
public void close() {
try {
selector.close();
socket.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
}
