JZ2440开发笔记（2）——minicom的安装和配置使

一、安装配置minicom

1、安装minicom

lingd@ubuntu:~$ sudo apt－get install minicom

2、配置minicom

lingd@ubuntu:~$ sudo minicom -s

出现这样的配置界面：

+-----[configuration]------+

| Filenames and paths |

| File transfer protocols |

| Serial port setup |

| Modem and dialing |

| Screen and keyboard |

| Save setup as dfl |

| Save setup as.. |

| Exit |

| Exit from Minicom |

+--------------------------+

选择Serial port setup , 会看到这样的选项：

+-----------------------------------------------------------------------+

| A - Serial Device : /dev/ttyS0 |

| B - Lockfile Location : /var/lock |

| C - Callin Program : |

| D - Callout Program : |

| E - Bps/Par/Bits : 115200 8N1 |

| F - Hardware Flow Control : No |

| G - Software Flow Control : No |

| |

| Change which setting? |

+-----------------------------------------------------------------------+

输入前面对应的字母即可进入相应的选项。将选项A的值设置为/dev/ttyS0 表示是串口1,将选项E的值设置为115200,将选项F设置为NO（请根据实际情况配置）.

设置默认上传/下载的目录， 选择Filenames and paths , 会看到这样的选项：

+-----------------------------------------------------------------------+

| A - Download directory : /home/lingd/arm/download |

| B - Upload directory : /home/lingd/arm/upload |

| C - Script directory : |

| D - Script program : runscript |

| E - Kermit program : |

| F - Logging options |

| |

| Change which setting? |

+-----------------------------------------------------------------------+

注意：开发板发送给pc的文件将保存在Download directory所设定的目录中，而pc要下载到开发板的文件保存在Upload directory所设定的目录中

设置完成后， 选择”Save setup as dfl”, 保存为默认设置.

然后选择“Exit”,即可进入Minicom的主界面:

Welcome to minicom 2.4

OPTIONS: I18n

Compiled on Jan 25 2010, 06:49:09.

Port /dev/ttyS0

Press CTRL-A Z for help on special keys

按Ctrl-A,再按z，可以获取到minicom CTRL-A命令的帮助信息

Welco+-------------------------------------------------------------------+

| Minicom Command Summary |

OPTIO| |

Compi| Commands can be called by CTRL-A <key> |

Port | |

| Main Functions Other Functions |

Press| |

| Dialing directory..D run script (Go)....G | Clear Screen.......C |

| Send files.........S Receive files......R | cOnfigure Minicom..O |

| comm Parameters....P Add linefeed.......A | Suspend minicom....J |

| Capture on/off.....L Hangup.............H | eXit and reset.....X |

| send break.........F initialize Modem...M | Quit with no reset.Q |

| Terminal settings..T run Kermit.........K | Cursor key mode....I |

| lineWrap on/off....W local Echo on/off..E | Help screen........Z |

| Paste file.........Y | scroll Back........B |

| |

| Select function or press Enter for none. |

| |

| Written by Miquel van Smoorenburg 1991-1995 |

| Some additions by Jukka Lahtinen 1997-2000 |

| i18n by Arnaldo Carvalho de Melo 1998 |

+-------------------------------------------------------------------+

CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.4 | VT102 | Offline

其中，我们用CTRL-A s来发送文件给开发板；而用CTRL-A r来接收开发板上的文件

二、为pc安装lrzsz

lrzsz is a unix communication package providing the XMODEM, YMODEM ZMODEM file transfer protocols.

lingd@ubuntu:~$ sudo apt-get install lrzsz

三、交叉编译lrzsz并下载到开发板上

1、下载lrzsz源码包

到http://download.chinaunix.net/download/0007000/6293.shtml，下一个lrzsz的tar包，

2、解压缩后，到解压目录中执行./configure

lingd@ubuntu:~/arm$ tar -zxf lrzsz-0.12.20.tar.gz

lingd@ubuntu:~/arm$ cd lrzsz-0.12.20/

lingd@ubuntu:~/arm/lrzsz-0.12.20$ ./configure

creating cache ./config.cache

checking for a BSD compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking whether make sets ${MAKE}... yes

checking for working aclocal... missing

checking for working autoconf... missing

checking for working automake... missing

checking for working autoheader... missing

checking for working makeinfo... missing

checking for gcc... gcc

checking whether the C compiler (gcc ) works... yes

checking whether the C compiler (gcc ) is a cross-compiler... no

checking whether we are using GNU C... yes

checking whether gcc accepts -g... yes

checking how to run the C preprocessor... gcc -E

checking whether gcc needs -traditional... no

checking for ranlib... ranlib

checking for POSIXized ISC... no

checking for AIX... no

checking for minix/config.h... no

checking for gcc option to accept ANSI C... none needed

checking for function prototypes... yes

checking for working const... yes

checking for inline... inline

checking for syslog in -lsocket... no

checking for syslog in -lbe... no

checking for gethostbyname in -lnsl... yes

checking for ANSI C header files... yes

checking for fcntl.h... yes

checking for limits.h... yes

checking for sys/ioctl.h... yes

checking for sys/time.h... yes

checking for unistd.h... yes

checking for sys/times.h... yes

checking for termios.h... yes

checking for sys/termios.h... yes

checking for termio.h... yes

checking for sys/termio.h... no

checking for sgtty.h... yes

checking for termios.h... (cached) yes

checking for sys/termios.h... (cached) yes

checking for termio.h... (cached) yes

checking for sys/termio.h... (cached) no

checking for sgtty.h... (cached) yes

checking for sys/mman.h... yes

checking for utime.h... yes

checking for syslog.h... yes

checking for sys/syslog.h... yes

checking for sys/param.h... yes

checking for sys/select.h... yes

checking for strings.h... yes

checking for arpa/inet.h... yes

checking for size_t... yes

checking for mode_t... yes

checking for off_t... yes

checking for speed_t... yes

checking for st_rdev in struct stat... yes

checking whether time.h and sys/time.h may both be included... yes

checking whether sys/time.h and sys/select.h may both be included... yes

checking whether struct tm is in sys/time.h or time.h... time.h

checking for errno declaration... yes

checking whether setvbuf arguments are reversed... no

checking return type of signal handlers... void

checking for unistd.h... (cached) yes

checking for getpagesize... yes

checking for working mmap... yes

checking for working alloca.h... yes

checking for alloca... yes

checking for gettimeofday... yes

checking for settimeofday... yes

checking for strchr... yes

checking for memcpy... yes

checking for select... yes

checking for vprintf... yes

checking for times... yes

checking for rdchk... no

checking for utime... yes

checking for syslog... yes

checking for siginterrupt... yes

checking for mkdir... yes

checking for mktime... yes

checking for strerror... yes

checking for strstr... yes

checking for strdup... yes

checking for strtoul... yes

checking for strtol... yes

checking for strpbrk... yes

checking for stpcpy... yes

checking for strftime... yes

checking for vasprintf... yes

checking for getopt_long... yes

checking for ftime... yes

checking that ftime works correctly... yes

checking for timezone variable... yes

checking for LOG_UUCP... yes

checking for argz.h... yes

checking for limits.h... (cached) yes

checking for locale.h... yes

checking for nl_types.h... yes

checking for malloc.h... yes

checking for string.h... yes

checking for unistd.h... (cached) yes

checking for values.h... yes

checking for sys/param.h... (cached) yes

checking for getcwd... yes

checking for munmap... yes

checking for putenv... yes

checking for setenv... yes

checking for setlocale... yes

checking for strchr... (cached) yes

checking for strcasecmp... yes

checking for __argz_count... yes

checking for __argz_stringify... yes

checking for __argz_next... yes

checking for LC_MESSAGES... yes

checking whether NLS is requested... yes

checking whether included gettext is requested... no

checking for libintl.h... yes

checking for gettext in libc... yes

checking for msgfmt... /usr/bin/msgfmt

checking for dcgettext... yes

checking for gmsgfmt... /usr/bin/msgfmt

checking for xgettext... /usr/bin/xgettext

checking for catalogs to be installed... de

updating cache ./config.cache

creating ./config.status

creating Makefile

creating intl/Makefile

creating lib/Makefile

creating testsuite/Makefile

creating man/Makefile

creating po/Makefile.in

creating src/Makefile

creating debian/rules

creating Specfile

creating systype

creating src/lrzszbug

creating config.h

3、修改Makefile

有三个Makefile需要修改，分别是 ~/arm/lrzsz-0.12.20/Makefile、~/arm/lrzsz-0.12.20/lib/Makefile、~/arm/lrzsz-0.12.20/src/Makefile

lingd@ubuntu:~/arm/lrzsz-0.12.20$ vi Makefile

lingd@ubuntu:~/arm/lrzsz-0.12.20$ vi lib/Makefile

lingd@ubuntu:~/arm/lrzsz-0.12.20$ vi src/Makefile

将这三个Makefile中的所有gcc替代成你开发板所需要的交叉编译器，如arm-linux-gcc

即：

CC = gcc

CPP = gcc -E

都改成

CC = arm-linux-gcc

CPP = arm-linux-gcc -E

4、编译

lingd@ubuntu:~/arm/lrzsz-0.12.20$ make

在lrzsz-0.12.20/src目录下会生成两个可执行文件lsz、lrz（或者sz、rz），把它们下载到开发板linux系统的/bin目录下。

lingd@ubuntu:~/arm/lrzsz-0.12.20$ cd src

lingd@ubuntu:~/arm/lrzsz-0.12.20/src$ ls

ansi2knr.1 lrz lsyslog.o Makefile.in tcp.o zm.o

ansi2knr.c lrz.c lsz protname.c timing.c zmodem.h

canit.c lrz.o lsz.c protname.o timing.h zperr.c

canit.o lrzszbug lsz.o rbsb.c timing.o zperr.o

crctab.c lrzszbug.in Makefile rbsb.o zglobal.h zreadline.c

crctab.o lsyslog.c Makefile.am tcp.c zm.c zreadline.o

四、测试

1、开发板-->PC机

在开发板上输入 lsz filename ,然后会出现一个传输界面，传输完成后可以在你设置的默认下载目录Download directory里找到这个文件。

2、PC机-->开发板

在开发板上先进入/tmp 目录，然后输入lrz。

# cd /tmp

# lrz

�z waiting to receive.**B0100000023be50

按Ctrl-A,再按s,选择zmoden，会出现一个选择文件的界面，选择你要传输的文件（按一下空格键选择目录，按两下空格键进入目录），回车后出现一个传输界面，传输完成后，便可以在开发板的/tmp目录下找到这个文件了。

转自：http://www.cnblogs.com/wanqieddy/archive/2011/07/14/2106087.html

JZ2440开发笔记（2）——minicom的安装和配置使用

更多文章、技术交流、商务合作、联系博主

微信扫码或搜索：z360901061

微信扫一扫加我为好友

QQ号联系： 360901061

您的支持是博主写作最大的动力，如果您喜欢我的文章，感觉我的文章对您有帮助，请用微信扫描下面二维码支持博主2元、5元、10元、20元等您想捐的金额吧，狠狠点击下面给点支持吧，站长非常感激您！手机微信长按不能支付解决办法：请将微信支付二维码保存到相册，切换到微信，然后点击微信右上角扫一扫功能，选择支付二维码完成支付。

【本文对您有帮助就好】元

2元

5元

10元

20元

自定义